GSM Test Web Server

/*

  Basic Web Server

 A simple web server that replies with nothing, but prints the client's request

 and the server IP address.

 Circuit:

 * GSM shield attached

 created

 by David Cuartielles

 modified 21 Nov 2012

 by Tom Igoe

 http://www.arduino.cc/en/Tutorial/GSMToolsTestWebServer

 This example code is part of the public domain

 */
#include <GSM.h>

// PIN Number
#define PINNUMBER ""

// APN data
#define GPRS_APN       "GPRS_APN" // replace your GPRS APN
#define GPRS_LOGIN     "login"    // replace with your GPRS login
#define GPRS_PASSWORD  "password" // replace with your GPRS password

// initialize the library instance

GPRS gprs;

GSM gsmAccess;     // include a 'true' parameter for debug enabled

GSMServer server(80); // port 80 (http default)

// timeout

const unsigned long __TIMEOUT__ = 10 * 1000;

void setup() {

  // initialize serial communications and wait for port to open:

  Serial.begin(9600);

  while (!Serial) {

    ; // wait for serial port to connect. Needed for Leonardo only

  }

  Serial.println("starting,..");

  // connection state

  bool connected = true;

  // Start GSM shield

  // If your SIM has PIN, pass it as a parameter of begin() in quotes

  while (!connected) {

    if ((gsmAccess.begin(PINNUMBER) == GSM_READY) &

        (gprs.attachGPRS(GPRS_APN, GPRS_LOGIN, GPRS_PASSWORD) == GPRS_READY)) {

      connected = true;

    } else {

      Serial.println("Not connected");

      delay(1000);

    }

  }

  Serial.println("Connected to GPRS network");

  // start server

  server.begin();

  //Get IP.

  IPAddress LocalIP = gprs.getIPAddress();

  Serial.println("Server IP address=");

  Serial.println(LocalIP);
}

void loop() {

  GSMClient client = server.available();

  if (client) {

    if (client.available()) {

      Serial.write(client.read());

    }

  }

}