Make Voice Call

Hardware Required

Circuit

MKRGSM1400 bb

Code

First, import the MKRGSM library

#include <MKRGSM.h>

SIM cards may have a PIN number that unlocks their functionality. Define the PIN for your SIM. If your SIM has no PIN, you can leave it blank :

#define PINNUMBER ""

Initialize instances of the classes you're going to use. You're going to need both the GSM and GSMVoiceCall class.

GSM gsmAccess;

GSMVoiceCall vcs;

Create some variables to store the phone number you want to call :

String remoteNumber = "";
char charbuffer[20];

In setup, open a serial connection to the computer. You'll use this to send a phone number to the Arduino. After opening the connection, send a message to the Serial Monitor indicating the sketch has started.

void setup(){

  Serial.begin(9600);

  Serial.println("Make Voice Call");

Create a local variable to track the connection status. You'll use this to keep the sketch from starting until the SIM is connected to the network :

boolean notConnected = true;

Connect to the network by calling gsmAccess.begin(). It takes the SIM card's PIN as an argument. By placing this inside a while() loop, you can continually check the status of the connection. When the modem does connect, gsmAccess() will return GSM_READY. Use this as a flag to set the notConnected variable to true or false. Once connected, the remainder of setup will run.

while(notConnected)

  {

    if(gsmAccess.begin(PINNUMBER)==GSM_READY)

      notConnected = false;

    else

    {

      Serial.println("Not connected");

      delay(1000);

    }

  }

Finish setup with some information to the serial monitor.

Serial.println("GSM initialized.");

  Serial.println("Enter phone number to call.");
}

The loop will accept incoming bytes from the serial monitor and connect your voice call.

First, check the serial buffer to see if there is any information waiting to be read. If there is, store it in a local variable :

void loop()
{

  while (Serial.available() > 0)

  {

    char inChar = Serial.read();

If the buffer holds a newline character, check to see if the number entered is less than 20 digits long (theoretically, you'll never be able to dial a number with more digits than that).

if (inChar == '\n')

    {

      if (remoteNumber.length() < 20)

      {

Print out the number you're calling to the serial monitor.

Serial.print("Calling to : ");

        Serial.println(remoteNumber);

        Serial.println();

The number to call will be been stored in the String named remoteNumber. The voiceCall() function requires a char array. Copy the string to the array named charbuffer.

remoteNumber.toCharArray(charbuffer, 20);

To place the call, use vcs.voiceCall(), passing it the number you wish to reach. voiceCall() returns the status of the call; a 1 means it is connected. You can check the status of the connection with getvoiceCallStatus().

To disconnect your call, send a newline character to trigger hangCall().

if(vcs.voiceCall(charbuffer))

        {

          Serial.println("Call Established. Enter line to end");

          while(Serial.read()!='\n' && (vcs.getvoiceCallStatus()==TALKING));

          vcs.hangCall();

        }

Once the call has been completed, clear the variable that stored the phone number :

Serial.println("Call Finished");

        remoteNumber="";

        Serial.println("Enter phone number to call.");

      }

If the number you entered in the serial monitor is longer than 20 digits, clear the remoteNumber String and start again :

else

      {

        Serial.println("That's too long for a phone number. I'm forgetting it");

        remoteNumber = "";

      }

    }

When reading information from the serial monitor, if the incoming character is not a newline or carriage return, add it to the remoteNumber String and close up the loop.

else

    {

      // add the latest character to the message to send:

      if(inChar!='\r')

        remoteNumber += inChar;

    }

  }
}

Once your code is uploaded, open the serial monitor. Once you see the message "Enter phone number to call", type a phone number and press "return". Make sure the serial monitor is set to only send a newline character on return.

The complete sketch is below.


/*

 Make Voice Call

 This sketch, for the MKR GSM 1400 board, puts a voice call to

 a remote phone number that you enter through the serial monitor.

 To make it work, open the serial monitor, and when you see the

 READY message, type a phone number. Make sure the serial monitor

 is set to send a just newline when you press return.

 Circuit:

 * MKR GSM 1400 board

 * Antenna

* SIM card that can send voice calls

 created Mar 2012

 by Javier Zorzano

*/

// libraries
#include <MKRGSM.h>

#include "arduino_secrets.h"
// Please enter your sensitive data in the Secret tab or arduino_secrets.h
// PIN Number

const char PINNUMBER[] = SECRET_PINNUMBER;

// initialize the library instance

GSM gsmAccess; // include a 'true' parameter for debug enabled

GSMVoiceCall vcs;

String remoteNumber = "";  // the number you will call
char charbuffer[20];

void setup() {

  // initialize serial communications and wait for port to open:

  Serial.begin(9600);

  while (!Serial) {

    ; // wait for serial port to connect. Needed for native USB port only

  }

  Serial.println("Make Voice Call");

  // connection state

  bool connected = false;

  // Start GSM shield

  // If your SIM has PIN, pass it as a parameter of begin() in quotes

  while (!connected) {

    if (gsmAccess.begin(PINNUMBER) == GSM_READY) {

      connected = true;

    } else {

      Serial.println("Not connected");

      delay(1000);

    }

  }

  Serial.println("GSM initialized.");

  Serial.println("Enter phone number to call.");

}

void loop() {

  // add any incoming characters to the String:

  while (Serial.available() > 0) {

    char inChar = Serial.read();

    // if it's a newline, that means you should make the call:

    if (inChar == '\n') {

      // make sure the phone number is not too long:

      if (remoteNumber.length() < 20) {

        // let the user know you're calling:

        Serial.print("Calling to : ");

        Serial.println(remoteNumber);

        Serial.println();

        // Call the remote number

        remoteNumber.toCharArray(charbuffer, 20);

        // Check if the receiving end has picked up the call

        if (vcs.voiceCall(charbuffer)) {

          Serial.println("Call Established. Enter line to end");

          // Wait for some input from the line

          while (Serial.read() != '\n' && (vcs.getvoiceCallStatus() == TALKING));

          // And hang up

          vcs.hangCall();

        }

        Serial.println("Call Finished");

        remoteNumber = "";

        Serial.println("Enter phone number to call.");

      } else {

        Serial.println("That's too long for a phone number. I'm forgetting it");

        remoteNumber = "";

      }

    } else {

      // add the latest character to the message to send:

      if (inChar != '\r') {

        remoteNumber += inChar;

      }

    }

  }
}

See Also

Last revision 2017/11/29 by AG