NB PIN Management

This example is part of the tools supplied for the Arduino MKR NB 1500 and helps you change or remove the PIN of a SIM card .

Hardware Required

Circuit

MKRNB1500 bb

Code

First, import the MKRNB library

#include <MKRNB.h>

Initialize an instance of the NBPin class.

NBPIN PINManager;

Create your variables, starting with a String to hold input from the serial monitor. Also make a flag for checking f the SIM has been authenticated with a valid PIN, and messages for the serial monitor.

String user_input = "";

boolean auth = false;

String oktext = "OK";

String errortext = "ERROR";

In setup, open a serial connection to the computer. After opening the connection, send a message to the Serial Monitor indicating the sketch has started. Call PINManager.begin() to reset the modem.

void setup(){

  Serial.begin(9600);

  Serial.println("Change PIN example\n");

  PINManager.begin();

Check to see if the SIM is locked with a PIN

while(!auth){

    int pin_query = PINManager.isPIN();

    if(pin_query == 1)

    {

If locked, ask for the PIN via the serial monitor. You'll use a custom function named readSerial() to parse the information.

Serial.print("Enter PIN code: ");

      user_input = readSerial();

If the PIN is valid, set the auth flag to true. Send a status message to the serial monitor indicating the result. If you enter the wrong PIN, you can try again. After 3 missed attempts, the PIN will be locked, and you'll need the PUK number to unlock.

if(PINManager.checkPIN(user_input) == 0)

      {

        auth = true;

        PINManager.setPINUsed(true);

        Serial.println(oktext);

      }

      else

      {

        Serial.println("Incorrect PIN. Remember that you have 3 opportunities.");

      }

    }

If the SIM is in PUK lock mode, ask for the PUK code and a new PIN

else if(pin_query == -1)

    {

      Serial.println("PIN locked. Enter PUK code: ");

      String puk = readSerial();

      Serial.print("Now, enter a new PIN code: ");

      user_input = readSerial();

      if(PINManager.checkPUK(puk, user_input) == 0)

      {

        auth = true;

        PINManager.setPINUsed(true);

        Serial.println(oktext);

      }

      else

      {

        Serial.println("Incorrect PUK or invalid new PIN. Try again!.");

      }

    }

If there is an error, and the PIN number and PUK are both locked, send an appropriate status message :

else if(pin_query == -2)

    {

      Serial.println("PIN & PUK locked. Use PIN2/PUK2 in a mobile phone.");

      while(true);

    }

If there's no PIN number, set the auth flag to true

else

    {

      // SIM does not requires authetication

      Serial.println("No pin necessary.");

      auth = true;

    }

  }

Check the registration on the NB network, and indicate if you're connected or not, and if you're roaming.

Serial.print("Checking register in NB network...");

  if(PINManager.checkReg() == 0)

    Serial.println(oktext);

  else if(PINManager.checkReg() == 1)

    Serial.println("ROAMING " + oktext);

  else

  {

    Serial.println(errortext);

    while(true);

  }
}

You're going to create a custom function to handle serial input from the serial monitor. Make a named function of type String.

String readSerial()
{

While there is serial information available, read it into a new String. If a newline character is encountered, return to the main program.

String text = "";

  while(1)

  {

    while (Serial.available() > 0)

    {

      char inChar = Serial.read();

      if (inChar == '\n')

      {

        return text;

      }

      if(inChar!='\r')

        text += inChar;

    }

  }
}

loop() acts as a PIN management tool, allowing you to turn the PIN on or off, and change it.

void loop()
{

  Serial.println("Choose an option:\n1 - On/Off PIN.");

  if(PINManager.getPINUsed())

    Serial.println("2 - Change PIN.");

  String user_op = readSerial();

  if(user_op == "1")

  {

    Serial.println("Enter your PIN code:");

    user_input = readSerial();

    PINManager.switchPIN(user_input);

  }

  else if(user_op == "2" & PINManager.getPINUsed())

  {

    Serial.println("Enter your actual PIN code:");

    String oldPIN = readSerial();

    Serial.println("Now, enter your new PIN code:");

    String newPIN = readSerial();

    PINManager.changePIN(oldPIN, newPIN);

  }

  else

  {

    Serial.println("Incorrect option. Try again!.");

  }

  delay(1000);
}

Once your code is uploaded, open the serial monitor to work with the PIN.

The complete sketch is below.


/*

 This example enables you to change or remove the PIN number of

 a SIM card inserted into a MKR NB 1500 board.

 Circuit:

 * MKR NB 1500 board

 * Antenna

 * SIM card

 Created 12 Jun 2012

 by David del Peral

*/

// libraries
#include <MKRNB.h>

// pin manager object

NBPIN PINManager;

// save input in serial by user

String user_input = "";

// authenticated with PIN code
boolean auth = false;

// serial monitor result messages

String oktext = "OK";

String errortext = "ERROR";

void setup() {

  // initialize serial communications and wait for port to open:

  Serial.begin(9600);

  while (!Serial) {

    ; // wait for serial port to connect. Needed for Leonardo only

  }

  Serial.println("Change PIN example\n");

  PINManager.begin();

  // check if the SIM have pin lock

  while (!auth) {

    int pin_query = PINManager.isPIN();

    if (pin_query == 1) {

      // if SIM is locked, enter PIN code

      Serial.print("Enter PIN code: ");

      user_input = readSerial();

      // check PIN code

      if (PINManager.checkPIN(user_input) == 0) {

        auth = true;

        PINManager.setPINUsed(true);

        Serial.println(oktext);

      } else {

        // if PIN code was incorrected

        Serial.println("Incorrect PIN. Remember that you have 3 opportunities.");

      }

    } else if (pin_query == -1) {

      // PIN code is locked, user must enter PUK code

      Serial.println("PIN locked. Enter PUK code: ");

      String puk = readSerial();

      Serial.print("Now, enter a new PIN code: ");

      user_input = readSerial();

      // check PUK code

      if (PINManager.checkPUK(puk, user_input) == 0) {

        auth = true;

        PINManager.setPINUsed(true);

        Serial.println(oktext);

      } else {

        // if PUK o the new PIN are incorrect

        Serial.println("Incorrect PUK or invalid new PIN. Try again!.");

      }

    } else if (pin_query == -2) {

      // the worst case, PIN and PUK are locked

      Serial.println("PIN and PUK locked. Use PIN2/PUK2 in a mobile phone.");

      while (true);

    } else {

      // SIM does not requires authetication

      Serial.println("No pin necessary.");

      auth = true;

    }

  }

  // start module

  Serial.print("Checking register in NB IoT / LTE Cat M1 network...");

  if (PINManager.checkReg() == 0) {

    Serial.println(oktext);

  }

  // if you are connect by roaming

  else if (PINManager.checkReg() == 1) {

    Serial.println("ROAMING " + oktext);

  } else {

    // error connection

    Serial.println(errortext);

    while (true);

  }
}

void loop() {

  // Function loop implements pin management user menu

  // Only if you SIM use pin lock, you can change PIN code

  // user_op variables save user option

  Serial.println("Choose an option:\n1 - On/Off PIN.");

  if (PINManager.getPINUsed()) {

    Serial.println("2 - Change PIN.");

  }

  String user_op = readSerial();

  if (user_op == "1") {

    Serial.println("Enter your PIN code:");

    user_input = readSerial();

    // activate/deactivate PIN lock

    PINManager.switchPIN(user_input);

  } else if (user_op == "2" && PINManager.getPINUsed()) {

    Serial.println("Enter your actual PIN code:");

    String oldPIN = readSerial();

    Serial.println("Now, enter your new PIN code:");

    String newPIN = readSerial();

    // change PIN

    PINManager.changePIN(oldPIN, newPIN);

  } else {

    Serial.println("Incorrect option. Try again!.");

  }

  delay(1000);
}

/*

  Read input serial

 */

String readSerial() {

  String text = "";

  while (1) {

    while (Serial.available() > 0) {

      char inChar = Serial.read();

      if (inChar == '\n') {

        return text;

      }

      if (inChar != '\r') {

        text += inChar;

      }

    }

  }
}

See Also

Last revision 2019/04/22 by SM