Tutorial.UdpNtpClient History

Hide minor edits - Show changes to markup

August 13, 2015, at 01:43 PM by Simone Maiocchi -
Changed lines 1-4 from:

Examples > Ethernet Library

Network Time Protocol (NTP) Client

to:
Changed lines 13-15 from:
  • Arduino Ethernet Shield
  • Shield-compatible Arduino board
to:
Changed lines 21-28 from:

The Ethernet shield allows you to connect a WizNet Ethernet controller to the Arduino via the SPI bus. It uses pins 10, 11, 12, and 13 for the SPI connection to the WizNet. Later models of the Ethernet shield also have an SD Card on board. Digital pin 4 is used to control the slave select pin on the SD card.

The shield should be connected to a network with an ethernet cable. You will need to change the network settings in the program to correspond to your network.

to:

The Ethernet shield allows you to connect a WizNet Ethernet controller to the Arduino or Genuino boards via the SPI bus. It uses pins 10, 11, 12, and 13 for the SPI connection to the WizNet. Later models of the Ethernet shield also have an SD Card on board. Digital pin 4 is used to control the slave select pin on the SD card.

The shield should be connected to a network with an ethernet cable. You will need to change the network settings in the program to correspond to your network.

Changed lines 29-30 from:

In the above image, your Arduino would be stacked below the Ethernet shield.

to:

In the above image, the Arduino or Genuino board would be stacked below the Ethernet shield.

Added line 33:
Changed line 42 from:
to:
Changed lines 45-47 from:
to:

See also


Last revision 2015/08/13 by SM

May 16, 2013, at 03:38 PM by Alberto Cicchi -
Changed lines 5-6 from:

In this example, you will use your Ethernet Shield and your Arduino to quety a Network Time Protocol (NTP) server. This way, your Arduino can get the time from the Internet.

to:

In this example, you will use your Ethernet Shield and your Arduino to query a Network Time Protocol (NTP) server. This way, your Arduino can get the time from the Internet.

November 28, 2011, at 04:28 PM by Scott Fitzgerald -
Changed line 39 from:
to:
November 28, 2011, at 04:27 PM by Scott Fitzgerald -
Changed line 39 from:
to:
November 16, 2011, at 05:12 AM by Scott Fitzgerald -
Changed line 39 from:
to:
November 16, 2011, at 04:33 AM by Scott Fitzgerald -
November 16, 2011, at 04:29 AM by Scott Fitzgerald -
Changed line 39 from:
to:
September 17, 2010, at 04:40 PM by Tom Igoe -
Added lines 1-44:

Share