**Reference** Language | Libraries | Comparison | Changes

From *The Bitmath Tutorial* in The Playground

There are two bit shift operators in C++: the left shift operator << and the right shift operator >>. These operators cause the bits in the left operand to be shifted left or right by the number of positions specified by the right operand.

More on bitwise math may be found here.

variable << number_of_bits

variable >> number_of_bits

variable - (byte, int, long) number_of_bits integer <= 32

int a = 5; // binary: 0000000000000101 int b = a << 3; // binary: 0000000000101000, or 40 in decimal int c = b >> 3; // binary: 0000000000000101, or back to 5 like we started with

When you shift a value x by y bits (x << y), the leftmost y bits in x are lost, literally shifted out of existence:

int a = 5; // binary: 0000000000000101 int b = a << 14; // binary: 0100000000000000 - the first 1 in 101 was discarded

If you are certain that none of the ones in a value are being shifted into oblivion, a simple way to think of the left-shift operator is that it multiplies the left operand by 2 raised to the right operand power. For example, to generate powers of 2, the following expressions can be employed:

1 << 0 == 1 1 << 1 == 2 1 << 2 == 4 1 << 3 == 8 ... 1 << 8 == 256 1 << 9 == 512 1 << 10 == 1024 ...

When you shift x right by y bits (x >> y), and the highest bit in x is a 1, the behavior depends on the exact data type of x. If x is of type int, the highest bit is the sign bit, determining whether x is negative or not, as we have discussed above. In that case, the sign bit is copied into lower bits, for esoteric historical reasons:

int x = -16; // binary: 1111111111110000 int y = x >> 3; // binary: 1111111111111110

This behavior, called sign extension, is often not the behavior you want. Instead, you may wish zeros to be shifted in from the left. It turns out that the right shift rules are different for unsigned int expressions, so you can use a typecast to suppress ones being copied from the left:

int x = -16; // binary: 1111111111110000 int y = (unsigned int)x >> 3; // binary: 0001111111111110

If you are careful to avoid sign extension, you can use the right-shift operator >> as a way to divide by powers of 2. For example:

int x = 1000; int y = x >> 3; // integer division of 1000 by 8, causing y = 125.

The following example can be used to print out the value of a received byte to the serial monitor, using the Leftshift operator to move along the byte from bottom(LSB) to top (MSB), and print out its Binary value:

// Prints out Binary value (1 or 0) of byte void printOut1(int c) { for (int bits = 7; bits > -1; bits--) { // Compare bits 7-0 in byte if (c & (1 << bits)) { Serial.print ("1"); } else { Serial.print ("0"); } } }

*Corrections, suggestions, and new documentation should be posted to the Forum.*

The text of the Arduino reference is licensed under a Creative Commons Attribution-ShareAlike 3.0 License. Code samples in the reference are released into the public domain.