Arduino library for interfacing with the BMP388 barometric pressure sensor which can be used for inferring altitude information.

Author: Alexander Entinger

Maintainer: Alexander Entinger

Read the documentation


This library is compatible with the samd, esp32, mbed, mbed_nano, mbed_portenta, mbed_edge, renesas_portenta, renesas_uno architectures so you should be able to use it on the following Arduino boards:

Compatibility Note

Note: while the library is supposed to compile correctly on these architectures, it might require specific hardware features that may be available only on some boards.


To use this library, open the Library Manager in the Arduino IDE and install it from there.