ADS1110

Signal Input/Output

ADS1110 Driver (16-BIT ADC with Onboard Reference, PGA and I2C Interface)
The ADS1110 is a 16-Bit Single-Channel (Single-Ended or Differential) ADC with Onboard Reference (2.048V), PGA & HW I2C capabilities. This library contains a complete driver for the ADS1110 offering full control over its Configuration Settings, as well as the ability to recieve raw data, voltage readings (in mV, to avoid floating point math) or percentage readings in either Single-Shot or Continuous mode.

Author: Nadav Matalon

Maintainer: Nadav Matalon

Read the documentation

Compatibility

This library is compatible with the avr architecture so you should be able to use it on the following Arduino boards:

• Arduino Micro
• Arduino Leonardo
• Arduino Mega
• Arduino Nano
• Arduino Uno
• Arduino Yún

Compatibility Note

Note: while the library is supposed to compile correctly on these architectures, it might require specific hardware features that may be available only on some boards.

Releases

To use this library, open the Library Manager in the Arduino IDE and install it from there.

• 1.3.0 (latest)
• 1.2.0
• 1.1.0