The FlashStorage library aims to provide a convenient way to store and retrieve user's data using the non-volatile flash memory of microcontrollers.
Useful if the EEPROM is not available or too small. Currently, ATSAMD21 and ATSAMD51 cpu are supported (and consequently every board based on this cpu like the Arduino Zero or Aduino MKR1000).
This library is compatible with the samd architecture so you should be able to use it on the following Arduino boards:
Note: while the library is supposed to compile correctly on these architectures, it might require specific hardware features that may be available only on some boards.
To use this library, open the Library Manager in the Arduino IDE and install it from there.