Communication
Concurrent multi-drop (i.e. multi-master, multi-slave) RS485 communication library
This library supports an RS485 transceiver connected to the USART (Tx/Rx) pins of the Arduino in a half-duplex, concurrent multi-drop environment. It provides message addressing and filtering as well as collision detection and avoidance.
Maintainer: Michael Jonker
This library is compatible with the avr architecture so you should be able to use it on the following Arduino boards:
Note: while the library is supposed to compile correctly on these architectures, it might require specific hardware features that may be available only on some boards.
To use this library, open the Library Manager in the Arduino IDE and install it from there.