Arduino library for communication with Keller pressure and water level sensors via Modbus.
A library to use an Arduino as a master to control and communicate via modbus with the pressure and water level sensors produced by Keller. Depends on the EnviroDIY/SensorModbusMaster library.

Author: Anthony Aufdenkampe

Maintainer: Anthony Aufdenkampe

Read the documentation


This library is compatible with the avr, sam, samd architectures so you should be able to use it on the following Arduino boards:

Compatibility Note

Note: while the library is supposed to compile correctly on these architectures, it might require specific hardware features that may be available only on some boards.


To use this library, open the Library Manager in the Arduino IDE and install it from there.