Device Control
Library to control a Lepton FLiR (forward looking infrared) thermal camera module from an Arduino-like board (Teensy 3+/ESP32+ minimum).
This library allows communication with boards running a Lepton FLiR thermal camera module. It provides a wide range of functionality from adjustable memory footprint size, adjustable temperature display mode, fast chip select enable/disable routines, to exposing the full functionality of the thermal camera itself.
Maintainer: NachtRaveVL
This library is compatible with the teensy, esp32 architectures.
To use this library, open the Library Manager in the Arduino IDE and install it from there.