LocoNet

Communication

Enables Digitrax LocoNet Communication
This library allows you to interface to a LocoNet network and send/receive LocoNet commands. The library currently supports the AVR ATTiny84 & ATMega88/168/328/32u4 using the 16-Bit Timer1 and ICP1. It also supports the Mega2560 using Timer5 and ICP5. It also supports the STM32F1 using TIM2 and the ESP8266 uses an hardware interrupt driven software uart.

Author: Alex Shepherd, John Plocher, Damian Philipp, Tom Knox, Hans Tanner, Björn Rennfanz

Maintainer: Alex Shepherd

Read the documentation

Go to repository

Compatibility

This library is compatible with the avr, esp8266, stm32 architectures so you should be able to use it on the following Arduino boards:

• Arduino Micro
• Arduino Leonardo
• Arduino Mega
• Arduino Nano
• Arduino Uno
• Arduino Yún

Compatibility Note

Note: while the library is supposed to compile correctly on these architectures, it might require specific hardware features that may be available only on some boards.

Releases

To use this library, open the Library Manager in the Arduino IDE and install it from there.

• 1.1.13 (latest)
• 1.1.12
• 1.1.10
• 1.1.9
• 1.1.4
• 1.1.3
• 1.1.2
• 1.1.1
• 1.1.0
• 1.0.7
• 1.0.6
• 1.0.5
• 1.0.4
• 1.0.3
• 1.0.2
• 1.0.1