MagVector 3D Magnetic Sensor


Library for the MPS MagVector 3D magnetic sensors.
Supports MagVector MV300 Sensors. Provide method to communicate through the I2C and SPI serial interfaces. The MagVector detects the direction and strength of the 3D (X, Y, Z) magnetic field. The signal from Hall sensors is amplified and converted to digital signal. An on-chip temperature sensor provides the information about the chip temperature.

Author: Mathieu Kaelin, Monolithic Power Systems

Maintainer: Mathieu Kaelin

Read the documentation


This library is compatible with all architectures so you should be able to use it on all the Arduino boards.


To use this library, open the Library Manager in the Arduino IDE and install it from there.