MCP9802 Driver (12-BIT Temperature Sensor with I2C Interface)
This library contains a complete driver for the MCP9802 that exposes its entire functionality (i.e. Configuration, Temperature, Hysteresis, Limit, and Alert Settings), allowing the user to get/set data in degrees Celsius or Fahrenheit.

Author: Nadav Matalon

Maintainer: Nadav Matalon

Read the documentation


This library is compatible with the avr architecture so you should be able to use it on the following Arduino boards:

Compatibility Note

Note: while the library is supposed to compile correctly on these architectures, it might require specific hardware features that may be available only on some boards.


To use this library, open the Library Manager in the Arduino IDE and install it from there.