MKRNB - attachGPRS()

Description

Connects to the NarrowBand IoT or LTE Cat M1 to initiate GPRS communication.

Every cellular provider has an Access Point Name (APN) that serves as a bridge between the cellular network and the internet. Sometimes, there is a username and password associated with the connection point, but the NB technology relies on other information to authenticate the connection, therefore you don’t need to specify anything because your SIM and the Network will establish the connection securely without any parameter given manually.

Syntax

gprs.attachGPRS()

Parameters

None

Returns

ERROR, IDLE, CONNECTING, NB_READY, GPRS_READY, TRANSPARENT_CONNECTED

Example

/*
  Web client

  This sketch connects to a website through a MKR NB 1500 board. Specifically,
  this example downloads the URL "http://example.org/" and
  prints it to the Serial monitor.

  Circuit:
   - MKR NB 1500 board
   - Antenna
   - SIM card with a data plan

  created 8 Mar 2012
  by Tom Igoe
*/

// libraries
#include <MKRNB.h>

#include "arduino_secrets.h"
// Please enter your sensitive data in the Secret tab or arduino_secrets.h
// PIN Number
const char PINNUMBER[]     = SECRET_PINNUMBER;

// initialize the library instance
NBClient client;
GPRS gprs;
NB nbAccess;

// URL, path and port (for example: example.org)
char server[] = "example.org";
char path[] = "/";
int port = 80; // port 80 is the default for HTTP

void setup() {
  // initialize serial communications and wait for port to open:
  Serial.begin(9600);
  while (!Serial) {
    ; // wait for serial port to connect. Needed for native USB port only
  }

  Serial.println("Starting Arduino web client.");
  // connection state
  boolean connected = false;

  // After starting the modem with NB.begin()
  // attach to the GPRS network with the APN, login and password
  while (!connected) {
    if ((nbAccess.begin(PINNUMBER) == NB_READY) &&
        (gprs.attachGPRS() == GPRS_READY)) {
      connected = true;
    } else {
      Serial.println("Not connected");
      delay(1000);
    }
  }

  Serial.println("connecting...");

  // if you get a connection, report back via serial:
  if (client.connect(server, port)) {
    Serial.println("connected");
    // Make a HTTP request:
    client.print("GET ");
    client.print(path);
    client.println(" HTTP/1.1");
    client.print("Host: ");
    client.println(server);
    client.println("Connection: close");
    client.println();
  } else {
    // if you didn't get a connection to the server:
    Serial.println("connection failed");
  }
}

void loop() {
  // if there are incoming bytes available
  // from the server, read them and print them:
  if (client.available()) {
    Serial.print((char)client.read());
  }

  // if the server's disconnected, stop the client:
  if (!client.available() && !client.connected()) {
    Serial.println();
    Serial.println("disconnecting.");
    client.stop();

    // do nothing forevermore:
    for (;;)
      ;
  }
}