Allows reading the MMA8653 accelerometer.
This library can setup and read the NXP MMA8653 accelerometer (Used by the BBC MicroBit).

Author: Lucas Hohmann

Maintainer: Lucas Hohmann

Read the documentation


This library is compatible with the avr, megaavr, sam, samd, nRF5, nrf51, nrf52, stm32f4, mbed architectures so you should be able to use it on the following Arduino boards:

Compatibility Note

Note: while the library is supposed to compile correctly on these architectures, it might require specific hardware features that may be available only on some boards.


To use this library, open the Library Manager in the Arduino IDE and install it from there.