MotorVID28

Device Control

A library for controlling VID28 or equivalent stepper motors (BKA30D-R5, X25).
Supports 6 step controllig or controllig using microsteps (PWM).

Author: Gijs Withagen

Maintainer: Gijs Withagen

Read the documentation

Go to repository

Compatibility

This library is compatible with the avr architecture so you should be able to use it on the following Arduino boards:

Compatibility Note

Note: while the library is supposed to compile correctly on these architectures, it might require specific hardware features that may be available only on some boards.

Releases

To use this library, open the Library Manager in the Arduino IDE and install it from there.