Checks the current status of all mouse buttons, and reports if any are pressed or not. By default, it checks the status of the left mouse button.
Mouse.isPressed();
Mouse.isPressed(button);
button: which mouse button was released (MOUSE_LEFT, MOUSE_RIGHT or MOUSE_MIDDLE, default is MOUSE_LEFT).1 if a button was pressed, 0 if a not.
#include <Mouse.h>
void setup() {
// The switch that will initiate the Mouse press
pinMode(2, INPUT);
// The switch that will terminate the Mouse press
pinMode(3, INPUT);
// Start serial communication with the computer
Serial.begin(9600);
// Initialize the Mouse library
Mouse.begin();
}
void loop() {
// A variable for checking the button's state
int mouseState = 0;
// If the switch attached to pin 2 is closed, press and hold the left mouse button and save the state ina variable
if (digitalRead(2) == HIGH) {
Mouse.press();
mouseState = Mouse.isPressed();
}
// If the switch attached to pin 3 is closed, release the left mouse button and save the state in a variable
if (digitalRead(3) == HIGH) {
Mouse.release();
mouseState = Mouse.isPressed();
}
// Print out the current mouse button state
Serial.println(mouseState);
delay(10);
}