Enables NMRA DCC Communication
This library allows you to interface to a NMRA DCC track signal and receive DCC commands. The library has been tested on AVR ATTiny84/85 & ATMega88/168/328/32u4, ESP8266 and Teensy 3.x using the INT0/1 Hardware Interrupt and micros() ONLY and no longer uses Timer0 Compare Match B, which makes it much more portable to other platforms.
Maintainer: Alex Shepherd
This library is compatible with all architectures so you should be able to use it on all the Arduino boards.
To use this library, open the Library Manager in the Arduino IDE and install it from there.