Device Control
This library enables you to use Hardware-based PWM channels on nRF52-based boards to create and output PWM to pins.
The most important feature is they're purely hardware-based PWM channels, supporting very high PWM frequencies. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks. These hardware-based PWMs, still work even if other software functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software-based PWM using ISR, millis() or micros(). That's necessary if you need to control devices requiring high precision. New efficient setPWM_manual function to facilitate waveform creation using PWM
Maintainer: Khoi Hoang
This library is compatible with the nordicnrf52, nrf52 architectures.
To use this library, open the Library Manager in the Arduino IDE and install it from there.