This library enables you to use Interrupt from Hardware Timers on an STM32H7-based Portenta_H7 board. PWM feature can now be used
These Portenta_H7 Hardware Timers, using Interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software timers using millis() or micros(). That's mandatory if you need to measure some data requiring better accuracy. It now supports 16 ISR-based Timers, while consuming only 1 Hardware Timer. Timers interval is very long (ulong millisecs). The most important feature is they're ISR-based Timers. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks.
Maintainer: Khoi Hoang
This library is compatible with the mbed, mbed_portenta, ArduinoCore-mbed architectures so you should be able to use it on the following Arduino boards:
To use this library, open the Library Manager in the Arduino IDE and install it from there.