Device Control
Operate 433/315Mhz devices.
Use your Arduino, ESP8266/ESP32 or Raspberry Pi to operate remote radio controlled devices. This will most likely work with all popular low cost power outlet sockets.
Maintainer: sui77,fingolfin
This library is compatible with the avr, esp8266, esp32, stm32 architectures so you should be able to use it on the following Arduino boards:
Note: while the library is supposed to compile correctly on these architectures, it might require specific hardware features that may be available only on some boards.
To use this library, open the Library Manager in the Arduino IDE and install it from there.