RV8803Tiny

Timing

A library to drive the RV8803 extremely precise, extremely low power, real-time clock from new ATTINY series that run on MegaTinyCore.
The RV-8803 is an extraordinarily precise, temperature-compensated RTC. The module itself can run as low as 240 nA. This library allows you to set and get time from the RTC in 24 hour Mode. The library itself uses a modifed i2C support library, underneath, as an alt for old wire library from effciency, memory and power saving for those low power low mem uCs. This library will not work on Tradional Arduino boards and or Atmel chips but only few new ATTINY series chips.

Author: Saurabh Datta

Maintainer: Saurabh Datta

Read the documentation

Compatibility

This library is compatible with the megaavr architecture so you should be able to use it on the following Arduino boards:

Compatibility Note

Note: while the library is supposed to compile correctly on these architectures, it might require specific hardware features that may be available only on some boards.

Releases

To use this library, open the Library Manager in the Arduino IDE and install it from there.