This library enables you to use ISR-based PWM channels on an Arduino SAM_DUE board to create and output PWM any GPIO pin.
It now supports 16 ISR-based PWM channels, while consuming only 1 Hardware Timer. PWM channel interval can be very long (ulong microsecs / millisecs). The most important feature is they are ISR-based PWM channels, supporting lower PWM frequencies with suitable accuracy. Their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks. These ISR-based PWMs, still work even if other software functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software-based PWM using millis() or micros(). That is necessary if you need to control devices requiring high precision. Now you can change the PWM settings on-the-fly
Maintainer: Khoi Hoang
This library is compatible with the sam, atmelsam architectures so you should be able to use it on the following Arduino boards:
To use this library, open the Library Manager in the Arduino IDE and install it from there.