SparkFun SCD30 Arduino Library


Library for the Sensirion SCD30 CO2 Sensor
An Arduino library for the SCD30 CO2 sensor from Sensirion. The SCD30 is a high quality NDIR based CO₂ sensor capable of detecting 400 to 10000ppm with an accuracy of ±(30ppm+3%). In order to improve accuracy the SCD30 has temperature and humidity sensing built-in, as well as commands to set the current altitude. Get the SCD30 here.

Author: SparkFun Electronics

Maintainer: SparkFun Electronics

Read the documentation


This library is compatible with all architectures so you should be able to use it on all the Arduino boards.


To use this library, open the Library Manager in the Arduino IDE and install it from there.