SparkFun u-blox GNSS Arduino Library

Sensors

Library for I2C and Serial Communication with u-blox GNSS modules
An Arduino Library to enable I2C, Serial and SPI communication for both NMEA reception and binary UBX sending to u-blox modules. Useful for interfacing to the SparkFun GPS-RTK2 ZED-F9P, SparkFun GPS-RTK NEO-M8P-2, the SparkFun SAM-M8Q, and the SparkFun ZOE-M8Q. Library also works with other u-blox based boards.The ZED-F9P and NEO-M8P-2 modules are top-of-the-line modules for high accuracy GNSS and GPS location solutions including RTK. The ZED-F9P is unique in that it is capable of both rover and base station operations allowing the module to become a base station and produce RTCM 3.x correction data.

Author: SparkFun Electronics

Maintainer: SparkFun Electronics

Read the documentation

Compatibility

This library is compatible with all architectures so you should be able to use it on all the Arduino boards.

Releases

To use this library, open the Library Manager in the Arduino IDE and install it from there.