SparkFun USB Hub Qwiic USB251x


Configure the PID/VID and power consumption settings on the USB2514X USB Hub.
Communicates with the USB2514B, USB2513B, or USB2512XB over I2C to quickly integrate a USB hub into your project. Downstream current limits can be set, vendor/product/device IDs can be set, and ports can be disabled and/or remapped.

Author: SparkFun Electronics

Maintainer: SparkFun Electronics

Read the documentation

Go to repository


This library is compatible with all architectures so you should be able to use it on all the Arduino boards.


To use this library, open the Library Manager in the Arduino IDE and install it from there.