Device Control
Allows controlling the X-NUCLEO-GNSS1A1 (GNSS expansion board based on Teseo LIV3F)
This library provides a command line interface to communicate with the GNSS module via UART or I2C.
Maintainer: stm32duino
This library is compatible with the stm32, sam, stm32l0 architectures so you should be able to use it on the following Arduino boards:
Note: while the library is supposed to compile correctly on these architectures, it might require specific hardware features that may be available only on some boards.
To use this library, open the Library Manager in the Arduino IDE and install it from there.