Write data to all the clients connected to a server.
server.write(data)
data: the value to write (byte or char)
byte : the number of bytes written. It is not necessary to read this.
#include <SPI.h>
#include <WiFi.h>
char ssid[] = "yourNetwork";
char pass[] = "yourPassword";
int status = WL_IDLE_STATUS;
WiFiServer server(80);
void setup() {
// initialize serial:
Serial.begin(9600);
Serial.println("Attempting to connect to WPA network...");
Serial.print("SSID: ");
Serial.println(ssid);
status = WiFi.begin(ssid, pass);
if ( status != WL_CONNECTED) {
Serial.println("Couldn't get a wifi connection");
while(true);
}
else {
server.begin();
}
}
void loop() {
// listen for incoming clients
WiFiClient client = server.available();
if (client == true) {
// read bytes from the incoming client and write them back
// to any clients connected to the server:
server.write(client.read());
}
}