Generates a square wave of the specified frequency (and 50% duty cycle) on a pin. A duration can be specified, otherwise the wave continues until a call to noTone(). The pin can be connected to a piezo buzzer or other speaker to play tones.
Only one tone can be generated at a time. If a tone is already playing on a different pin, the call to tone() will have no effect. If the tone is playing on the same pin, the call will set its frequency.
Use of the
tone() function will interfere with PWM output on pins 3 and 11 (on boards other than the Mega).
It is not possible to generate tones lower than 31Hz. For technical details, see Brett Hagman’s notes.
tone(pin, frequency, duration)
pin: the Arduino pin on which to generate the tone.
frequency: the frequency of the tone in hertz. Allowed data types:
duration: the duration of the tone in milliseconds (optional). Allowed data types: