Reference   Language | Libraries | Comparison | Changes

WiFi101OTA

WiFiOTA.poll()

Description

Checks for WiFi OTA updates

Syntax

WiFiOTA.poll();

Parameters

None

Example

#include <SPI.h>
#include <WiFi101.h>
#include <WiFi101OTA.h>

char ssid[] = "yourNetwork";      // your network SSID (name)
char pass[] = "secretPassword";   // your network password

int status = WL_IDLE_STATUS;

void setup() {
  //Initialize serial:
  Serial.begin(9600);

  // check for the presence of the shield:
  if (WiFi.status() == WL_NO_SHIELD) {
    Serial.println("WiFi shield not present");
    // don't continue:
    while (true);
  }

  // attempt to connect to WiFi network:
  while ( status != WL_CONNECTED) {
    Serial.print("Attempting to connect to SSID: ");
    Serial.println(ssid);
    // Connect to WPA/WPA2 network. Change this line if using open or WEP network:
    status = WiFi.begin(ssid, pass);
  }

  // start the WiFi OTA library with internal (flash) based storage
  WiFiOTA.begin("Arduino", "password", InternalStorage);
}

void loop() {
  // check for WiFi OTA updates
  WiFiOTA.poll();
}
 

See also

begin()

Reference Home

Corrections, suggestions, and new documentation should be posted to the Forum.

The text of the Arduino reference is licensed under a Creative Commons Attribution-ShareAlike 3.0 License. Code samples in the reference are released into the public domain.

Share