Decimal (base 10)
This is the common-sense math with which you are acquainted. Constants without other prefixes are assumed to be in decimal format.
n = 101; // same as 101 decimal ((1 * 10^2) + (0 * 10^1) + 1)
Binary (base 2)
Only the characters 0 and 1 are valid.
n = B101; // same as 5 decimal ((1 * 2^2) + (0 * 2^1) + 1)
The binary formatter only works on bytes (8 bits) between 0 (B0) and 255 (B11111111). If it is convenient to input an int (16 bits) in binary form you can do it a two-step procedure such as:
myInt = (B11001100 * 256) + B10101010; // B11001100 is the high byte`
Octal (base 8)
Only the characters 0 through 7 are valid. Octal values are indicated by the prefix "0" (zero).
n = 0101; // same as 65 decimal ((1 * 8^2) + (0 * 8^1) + 1)
It is possible to generate a hard-to-find bug by (unintentionally) including a leading zero before a constant and having the compiler unintentionally interpret your constant as octal.
Hexadecimal (base 16)
Valid characters are 0 through 9 and letters A through F; A has the value 10, B is 11, up to F, which is 15. Hex values are indicated by the prefix "0x". Note that A-F may be upper (A-F) or lower case (a-f).
n = 0x101; // same as 257 decimal ((1 * 16^2) + (0 * 16^1) + 1)
Notes and Warnings
By default, an integer constant is treated as an int with the attendant limitations in values. To specify an integer constant with another data type, follow it with:
a 'u' or 'U' to force the constant into an unsigned data format. Example: 33u
a 'l' or 'L' to force the constant into a long data format. Example: 100000L
a 'ul' or 'UL' to force the constant into an unsigned long constant. Example: 32767ul